Massive lot of industrial shelving in pristine condition! 2,970 SQFT of shelving

Description

Hello, we just know this shelving is going to look amazing in your warehouse! Its looked good in our warehouse but has never found its way to being set up. This shelving was
professionally
taken down in 2019 after being used for about 10ish years in a government office. It has been very carefully packaged and is exactly 1/2 truckload. It may be possible to put this on a 26FT penske truck as well. Listed below is a complete inventory of what you are purchasing, a link to more images as well as a video showing the shelving.
Here is a link for more images and video: https://drive.google.com/drive/folders/1evb3wBSrKdKf0CLNCEDjhKawVNiBTj7r?usp=sharing
990 (12" X 36") shelves in excellent, rust free condition. There are a few labels but besides the stickers/labels this shelving is in amazing condition! Shelves are 20GA welded Steel can can be found on page 10 of the Triboro sales manual on their website.
3,763 large shelf clips all in perfect shape/condition!
248 rear shelf clips used for bottom shelf that sits near floor, all in perfect shape/condition!
127 front shelf beams, used to connect/secure the shelving and support the front of the bottom shelf.
44 shelf end caps, these are the vertical shelf ends. These are in good shape, some do show some surface rust but they are all in good structural condition.
82 Shelf uprights/supports, these are double sided meaning they are meant to connect and be sandwiched between two shelf sections. These are in good shape, some do show some surface rust but they are all in good structural condition.
82 Shelf backs, these are pieces of sheet steel that provides the shelf structure strength and is the back of the shelf. These are in good shape, a few show slight surface rust and a few have some dents/dings but are all in really good structural shape/condition.
Misc shelving bolts, there is 1/4 of a 5 gallon bucket of bolts, but you may need more to set these shelves up. These are standard nuts and bolts you can pick up at any local hardware store.
Pallet inventory (9 pallets, however pallets 1, 2 and 3 will require 2 pallet spaces. This will take 20FT of a semi truck trailer. May be possible to move on a Penske 26FT truck (or 20FT truck) however total weight is 12,540 a little over the max weight of a Penske truck.
50″ X 92″ X 19″ 940 LBS
-15 end caps
-3763 large shelf clips
-248 rear shelf clips used for bottom shelf that sits near floor
-Misc shelving bolts, there is 1/4 of a 5 gallon bucket of bolts
-127 front shelf plates
47" X 92" X 19" 2200 LBS
-40 shelf uprights double sided
-15 end caps
47" X 92" X 19" 2200 LBS
-42 shelf uprights double sided
-14 end caps
42" X 48" X 72" 1200 LBS
-165 shelves 12" X 35.5" X 1.25" Thick
42" X 48" X 72" 1200 LBS
-165 shelves 12" X 35.5" X 1.25" Thick
42" X 48" X 72" 1200 LBS
-165 shelves 12" X 35.5" X 1.25" Thick
42" X 48" X 72" 1200 LBS
-165 shelves 12" X 35.5" X 1.25" Thick
42" X 48" X 72" 1200 LBS
-165 shelves 12" X 35.5" X 1.25" Thick
42" X 48" X 72" 1200 LBS
-165 shelves 12" X 35.5" X 1.25" Thick
Winning bidder will need to remove the shelving within 12 days. We have a forklift and can load a truck up. If you have any questions please feel free to reach out (419##960##1953)! Thank you!! William